ILASS-Americas

CURRENT AWARD WINNERS

2019 HAROLD C. SIMMONS AWARD PRESENTED TO		2019 W. R. MARSHALL AWARD PRESENTED TO
William Doak Charged Liquid Jet Dynamics of a Dielectric Fluid Paper presented at ICLASS-2018 (Advisor - P. Chiarot)		Robin Hellmann, Paul Jochmann, Phillippe Leick Karl Georg Stapf, Erik Schünemann, and D. Théveni Multi-objective optimization of high-pressure gasoline injector nozzles using Genetic Algorithms coupled with Computational Fluid Dynamics (CFD): exploiting the manufactural design space Paper presented at ICLASS-2108
Past Award Winners
HAROLD C. SIMMONS AWARD WINNERS 2018 Yu-Hung Changti Spatial-Temporal Flow Dynamics Prediction in a Large Design Space via Data-Driven Method Paper presented at ILASS-2017 (Advisor - Vigor Yang) 2017 Gina Magnotti Paper presented at ILASS 2016 (Co-Author Caroline Genzale) Characterization of Diesel Spray Breakup Models Using Visible and X-Ray Extinction Measurements		W. R. MARSHALL AWARD WINNERS 2018 Quantitative, Bias-Corrected Measurements of Droplet Position, Size, and Velocity with Digital In-Line Holography Yi Chen, Daniel Guildenbecher Paper presented at ILASS-2017 2017 String Flash-Boiling in Flashing and Non-Flashing Gasoline Direct Injection Smulations with Transient Needle Motion Eli Baldwin, Ronald Grover, Daniel Duke, Katarzyna Matusik, Alan Kastengren, Christopher Powell, Scott Parrish, and David Schmidt Paper presented at ILASS-2016
2016 Pascal Guillet (Co-Authors Erich Windhab and Alessandra Kessler) Laboratory of Food Processing Engineering, ETH Zurich Production of Substructured Fat Systems by Co-spraying of Two Different Fat (-emulsions) with Very-low Emulsifier Concentrations and Controlled Fat Polymorphism		2016 Film Stabilization as Key Step of Atomization Process for Spray-Drying of Highly Concentrated Emulsions or Suspensions Michael Stranzinger Nestec, Ltd.
2015 Benjamin Halls Department of Mechanical Engineering, Iowa State University (Co-Authors Terrence Meyer, Alan Kastengren) X-Ray Fluorescence Measurement of Mixing in Impinging Jets		2015 Receptivity of a Cryogenic Coaxial Jet to Acoustic Disturbances Jeff Wegener, UCLA David Forliti, Sierra Lobo, Inc. Ivett Leyva, AFRL/RQRE Doug Talley, AFRL/RQRC
2014 Mark Owkes Sibley School of Mechanical and Aerospace Engineering Cornell University (Co-Author O. Desjardins) Consistent and Conservative Computational Framework for High Density Ratio Simulations		2014 Synchrotron X-Ray Measurements of Cavitation Daniel Duke, Alan Kastengren, and Christopher Powell Argonne National Laboratory
2013 D.T. Ryddner Department of Mechanical Engineering University of Madison, Wisconsin Madison (Co-Author JM.F. Trujillo) A Fully Resolved UWS Droplet Simulation		2013 Breakup and Dynamics of Liquid Droplets P. Khare, D. Ma, X. Chen, and V. Yang
2012 Suraj Deshpande University of Wisconsin-Madison (Co-Authors Jia Gao and Mario Trujillo) Characteristics of a Hollow-Cone Spray in Crossflow		2012 A Dense Fluid Approximation for the Simulation of Diesel Fuel Injection Rainer Dahms, Lyle Pickett, and Joseph Oefelein (Sandia National Laboratories)
2011 Samir Tambe University of Cincinnati (Co-Authors San-Mou Jeng) Three Dimensional Penetration and Velocity Distribution of Liquid Jets Injected Transversely into a Swirling Crossflow		2011 Exhaust Tailpipe Fuel Spray Optimization and Fuel Usage Rates for Operating an Exhaust Aftertreatment System on Heavy-Duty Diesel Powered Engine James McCarthy, R. Daniel Bamber, and Steve Ambrose (Eaton Corporation):
2010 Matthew Svreck Stanford University (Co-Authors S.L. Miller and C.F. Edwards) Effect of Extreme Compression on Diesel Spray Penetration and Dispersion		2010 Modeling Sub-Grid Scale Mixing of Vapor in Diesel Sprays using Jet Theory Neerav Abani and Rolf Reitz of the University of Wisconsin-Madison
2009 Anita Ramirez University of Illinois--Chicago (Co-Authors: S. Som, S.K. Aggarwal (also UIC) and A. Kastengren, E. El-Hannouny, D. Longman, C. Powell, Argonne National Laboratory) Quantitative Measurement of Diesel Fuel Spray Characteristics in the Near-Nozzle Region of a Multi-Hole Injector		2009 On Simulating Primary Atomization Using the Refined Level Set Grid Method Marcus Herrmann of Arizona State University
2008 Andre McDonald University of Toronto (Co-Authors Sanjeev Chandra, University of Toronto, Larry Rosenzweig, GE Global Research, Christian Moreau, National Research Council Canada) Impact of Plasma-Sprayed Particles on Textured Silicon Wafers		2008 Investigation of the Effect of Injector Internal Geometry on the Penetration of a Plain Liquid Jet into a Subsonic Crossflow Christopher Brown, Ulises Mondragon, and Vincent McDonell (Energy Research Consultants):
2007 James Smith (University of Michigan) (Co-Author Volker Sick) Real-Time Imaging of Fuel Injection, Ignition, and Combustion in a Direct-Injected Spark-Ignition Engine		2007 Behavior of a Rocket-Like Coaxial Injector in an Acoustic Field D. W. Davis, B. Chedroudi, and D.G. Talley
2006 Brandon Masuda University of California, Irvine (Co-Authors Vincent McDonell, UC Irvine; Gary Oskam Solar Turbines) Liquid Jet Injected into a Crossflow at Elevated Temperature and Pressure		2006 Breakup of Round Turbulent Liquid Jets in Air Crossflows K. Lee, F. J. Diez, G. M. Faeth, University of Michigan, C. Aalburg,G.E. Global, K.A. Sallam,Oklahoma State University
2005 R. Branam Department of Aerospace Engineering, The Pennsylvania State University, University Park, PA 16802 Molecular Dynamics Simulations of Supercritical Jet Mixing		2005 Multiple Scattering Effects on Infrared Scattering Measurements used to Characterize Droplet Size and Volume Fraction Distributions in Diesel Sprays J.E. Labs and T.E. Parker Division of Engineering, Colorado School of Mines, Golden, Colorado 80401 USA
2004 A. Wadhwa Purdue University, West Lafayette, IN 47907-2014, USA A Hybrid Compressible-Incompressible Numerical Method to Compute Transient Flows Past Droplets		2004 A Model for Droplet and Spray Vaporization Under Elevated Pressure Conditions Using Continuous Thermodynamics D. Wang and C.F. Lee, Department of Mechanical and Industrial Engineering, University of Illinois at Champaign-Urbana, Urbana, IL
2003 Vala Mehdi-Nejad University of Toronto Bubble Entrapment During Droplet Impact		2003 A Review on Penetration Heights of Transverse Liquid Jets in High-Speed Flows K.-C. Lin, P. J. Kennedy: Taitech, Inc., Beavercreek, Ohio 45430 T. A. Jackson: Air Force Research Laboratory, Propulsion Directorate Wright-Patterson AFB, Ohio 45433, USA
		2002 Through the Diesel Nozzle Hole -- a Journey of Discovery Soteriou, Andrews, Torres, Smith, & Kunkulagunta Delphi Diesel Systems, UK

News & Events

News & Events
Atomization and Sprays

The Journal of the International Institutes for Liquid Atomization and Spray Systems

Join Our Mailing List

Email:

For Email Newsletters you can trust
Inquiries regarding ILASS-Americas should be directed to:

Professor Scott Samuelsen
Secretariat, ILASS-Americas
UCI Combustion Laboratory
University of California, Irvine
Irvine, CA 92697-3550
Tel: (949) 824-5468
Fax: (949) 824-7423
E-mail: Info@ilass.uci.edu